Temperatures higher than 125 ̊C (257 ̊F) or lower than -40 ̊C (-22 ̊F) will damage the sensor.
This Temperature sensor is NOT recommended for use with laboratory chemicals.
Do NOT put any part of the sensor into a direct flame or onto a hot plate.
The total length of PVC cable and thermistor wire is approximately 39 cm. It is made up of about 17 cm of PVC cable, approx. 3.5 mm diameter, with approx. 4 cm of heat shrink tubing linking the cable to the thermistor wire. The length of thermistor wire and bead is approx. 18 cm long, with a diameter of approx. 2 mm.
The electronics in the Smart Wireless module of the sensor have a working range of 0 to 40 ̊C. Position the sensor so that this part of the sensor is kept away from the source of heat. Take steps to protect against excessive steam.
The Smart Wireless module is not waterproof; it has an operating range of 0 to 95% RH (non- condensing). Do not place the sensor in an environment in which high humidity levels are possible, as this may result in damage or malfunction.
Do not submerge the sensor. Clean the Smart Wireless module using a damp cloth; do not immerse in water or detergent.
If the sensor has been left in the cold, let it warm to near room temperature before waking it from sleep.
